What is the most important thing to check on a used forklift?
Start with the data plate and hour meter, then the mast and forks. A missing data plate, a meter that does not match the wear, or cracked forks are reasons to walk away or negotiate hard.

25 points to check before you buy, with the reason each one matters. Tick them off on your phone or print it for the walkaround.
Quick answer
Before buying a used forklift, check that the data plate is readable and matches the serial number, that the hour meter fits the wear, and that the forks, chains and mast are straight and run smoothly. Look for hydraulic leaks, test steering, brakes and the drive, then check the battery and charger on electric trucks or the engine and LP system on propane trucks.
Updated by Budget Forklifts, University Park, IL
Every truck we sell goes through these checks first. For the regulations behind daily inspections and capacity plates, see OSHA 1910.178, Powered Industrial Trucks.
0 of 25 checked
Browse inspected used forklifts by size or get a spec from the forklift finder.
Start with the data plate and hour meter, then the mast and forks. A missing data plate, a meter that does not match the wear, or cracked forks are reasons to walk away or negotiate hard.
There is no single cut-off. Condition and service history matter more than the number. A well-serviced truck with higher hours can outlast a neglected low-hour one, which is why the rest of this checklist matters.
Yes. Our service team in University Park, IL inspects trucks before purchase and services forklifts across the Chicago area. Call 708-358-6555 or send a request below.
Yard
2400 University Pkwy, University Park, IL 60484
Phone
Hours
Mon - Fri: 7am - 4pm. Emergency: 24/7
Service area
Illinois, Chicago metro, Midwest, nationwide delivery